FBG / Adhesive Filling

FBG Semi-Automatic Horizontal Hard Tube Filling Machine

Fill adhesives into hard tubes with compact, operator-assisted equipment, touch-screen controls and a vibratory cap-feeding assembly.

Metering cylinder assembly

Small and medium batch production

Horizontal, space-saving layout

Access for cleaning and maintenance

Request a Quote View Specifications

FARFLY FBG semi-automatic horizontal hard tube filling machine with touch screen and vibratory cap feeder

Filling Volume

Up to 500 mL

Confirm your required fill sizes

Production Rate

10-30 pcs/min

Product and handling dependent

Metering Accuracy

Within ±0.5%

Verify at your operating conditions

Rated Power

2.5 kW

Compact horizontal equipment

How the FBG Hard Tube Filler Works

The FBG uses a metering cylinder assembly to dose adhesive into hard tube containers. A touch-screen panel brings the operating controls together, while a vibratory feeder, cap tray and track support cap handling.

Its semi-automatic arrangement is intended for operator-assisted production. This makes it relevant when a compact filling station and flexible batch scheduling are more important than fully automated tube handling.

Match the material, fill volume and tube-and-cap format first. Then confirm the operator tasks and production rate for your application.

Metering and Cap HandlingTwo equipment functions to evaluate with your actual product and package.

Controlled Dosing

The quantitative cylinder assembly provides the metering function. The required dose and material flow must be matched to the filling setup.

Cap-Feeding Assembly

The vibratory feeder, tray and track support cap delivery to the capping area. Closure fit depends on the tube and cap geometry.

Machine Design

Components Built Around Adhesive Tube Filling

A modular arrangement combines dosing, operator controls and cap-handling components in a compact horizontal machine.

FBG horizontal adhesive tube filler showing the touchscreen, metering area and vibratory cap-feeding assembly

Metering Cylinder AssemblyThe dosing assembly meters adhesive for filling into compatible hard tubes.

Touch-Screen Control PanelA central operating interface supports machine control during setup and production.

Vibratory Cap FeederThe feeder, controller, tray and cap track form the cap-supply arrangement.

Capping Area & Air ConnectionThe capping seat supports the closure operation; the machine has a compressed-air inlet for the specified supply.

Where Semi-Automatic Filling Fits

The FBG is designed for adhesive production using hard tube packaging, particularly small and medium batches with operator-assisted handling.

Batch Production

Small & Medium Runs

Evaluate the FBG for batch-based adhesive filling where a dedicated station can be matched to the required output and available operators.

Product Variety

Multiple Adhesive Products

Plan different products around their filling behavior, cleaning requirements and tube format. Review the intended range before selecting the machine.

Factory Layout

Standalone or Line Integration

Use the horizontal layout when assessing a separate filling station or a connection to existing production, with room for material supply and operator access.

Start with your actual package. Send hard tube and cap drawings or samples. The tube opening, overall dimensions and closure geometry must be reviewed together; this machine should not be assumed suitable for flexible-tube heat sealing.

FBG Tube Filling Machine Specifications

Published equipment data for initial selection. Confirm the required fill performance, package compatibility and installation utilities before ordering.

FBG semi-automatic horizontal hard tube filling machine technical specifications
Parameter	FBG
Operation / Layout	Semi-automatic / Horizontal
Published filling range	0-500 mL*
Metering accuracy	Within ±0.5%
Production rate	10-30 pcs/min
Power supply	220 V / 380 V**
Rated power	2.5 kW
Compressed-air pressure	0.6 MPa
Overall dimensions (L × W × H)	1450 × 1100 × 1560 mm
Machine weight	380 kg

* The practical minimum dose and usable range depend on the material and filling setup. Accuracy and output depend on the product, fill volume, tube format and operating conditions. ** Confirm the required voltage and electrical configuration before ordering.

Application Review

Confirm the Complete Filling Setup

A suitable machine must match both the adhesive and the packaging process. Review these points when preparing an equipment enquiry.

Review ItemFBG BasisWhat to Confirm

Material & doseMetering cylinder; up to 500 mLProduct flow at filling temperature, target dose and required tolerance.

Tube & closureHard tube filling with cap-handling componentsTube dimensions, opening geometry and compatible cap samples.

Operator involvementSemi-automatic operationResponsibilities for tube handling, replenishment and finished-product handling.

Material supplyUpstream feed to be reviewedHow adhesive reaches the filler and the available feed conditions.

Site readiness2.5 kW; 0.6 MPa air pressureElectrical configuration, compressed-air capacity, floor space and access.

Request an FBG Filling Machine Quote

Send your adhesive details, target fill and tube samples or drawings. FARFLY can review the application and discuss the filling setup with you.

Request a Quote

Adhesive InformationProduct type, viscosity at filling temperature, and relevant fillers or particles.

Required FillAll target volumes in mL. For a weight-based specification, include density and the required weight tolerance.

Tube & CapDrawings or samples with tube diameter, length, opening dimensions and cap geometry.

Production PlanTarget output per minute or shift, batch sizes and planned product changes.

Site & Feed SetupMaterial supply arrangement, electrical supply, compressed-air availability and space for installation.

FBG Semi-Automatic Tube Filling Machine FAQ

Common questions about filling capacity, operator involvement, tube compatibility and site requirements.

What is the FBG semi-automatic horizontal hard tube filling machine?

The FBG is an operator-assisted filling machine for adhesives packaged in hard tubes. Its horizontal layout combines a metering cylinder assembly, touch-screen controls and a vibratory cap-feeding assembly.

What filling volume does the FBG support?

The published filling range is 0-500 mL. For selection, specify each target fill volume up to 500 mL. The practical minimum dose and usable range need to be confirmed with your material and tube format.

What is the production rate?

The listed machine production rate is 10-30 pieces per minute. Actual output depends on fill volume, material flow, packaging format and operator handling.

How accurate is the filling system?

The published metering accuracy is within ±0.5%. Performance should be confirmed for the intended material, fill setting and operating conditions. If your specification is based on filled weight, provide product density and the required weight tolerance.

Does semi-automatic mean the machine loads and unloads tubes automatically?

No. The FBG is a semi-automatic system and should not be specified as a fully automatic tube-handling line. The allocation of operator tasks and machine actions needs to be confirmed for the supplied configuration.

Which tubes and caps are compatible?

The FBG is intended for hard tube containers and includes cap-feeding and capping components. Provide tube and cap drawings or samples to confirm dimensional fit and the closure arrangement; no universal tube-size range is specified.

What electrical and compressed-air supplies are required?

The published power supply is 220 V / 380 V, with a rated power of 2.5 kW and compressed-air pressure of 0.6 MPa. Confirm the required voltage and electrical configuration before ordering. Air consumption is not specified by the pressure figure.

Is the FBG suitable for small-batch adhesive production?

Yes. The machine is positioned for small and medium batches and production involving multiple adhesive products. Material compatibility, cleaning requirements and package changeovers should be reviewed for the planned product range.